Cass Technology CASTLE S SERIES Bedienungsanleitung PDF herunterladen (Seite 41)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

Chapter 11 – CASTLE-S Reader

Programming During Emergency Mode At The Reader

When the controller is down, the readers will then automatically go into

Emergency Mode. The readers will operate in "stand alone" system. But the

features and the security level will be lesser. Even though, the user can still

control the readers instead of Controller. It requires user to enter the Master PIN

for the specify reader at the door. All the transaction would not be downloaded to

controller on this event.

The command are tabulated as below:

Comma

Description

2 Auto Pin mode ON/OFF

3 Facility Code ON/OFF

4 Lock release time

5 Door open time

10 Security ON/OFF

11 Change Facility Code

12 Change Master Pin

18 Change Emergency Pin

To enter the Programming Mode, user has to key in 6 digit of the Master PIN as

the user set at the Individual Door Setting before the controller is down.

The steps are described below: -

02. Auto-PIN Mode ON/OFF

i. Press * Button

ii. Key in Mater PIN

iii. Press 02

iv. Press 1 to ON or 0 to OFF

04. Lock Release Time

i. Press * Button

ii. Key in Mater PIN

iii. Press 04

iv. Key in Period Of Time (0-15)

10. Security ON/OFF

i. Press * Button

v. Key in Mater PIN

vi. Press 10

vii. Press 1 to ON 0 to OFF

12. Change Master Pin

i. Press * Button

ii. Key in Mater PIN

iii. Press 12

iv. Key In New Master PIN in 6

digits.

03. Facility Code ON/OFF

i. Press * Button

ii. Key in Mater PIN

iii. Press 03

iv. Press 1 to ON or 0 to OFF

05. Door open time

i. Press * Button

ii. Key in Mater PIN

iii. Press 05

iv. Key In Period Of Time (0-30)

11. Change Facility Code

i. Press * Button

ii. Key in Mater PIN

iii. Press 11

iv. Key in the Facility Code

18. Change Emergency Pin

i. Press * Button

ii. Key in Mater PIN

iii. Press 18

iv. Key in the new Emergency

PIN no in 4 digits.

CASS TECHNOLOGY SDN BHD(338857-X) 41

1 2 ... 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Cass Technology CASTLE S SERIES Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern